SYS-DDM123-02 Create, activate and move in on a profiled metering point
Test ID | SYS-DDM123-02 |
Description | Create, activate and move in on a profiled, consumption metering point |
BRS's | BRS-NO-121 |
Roles | DDM |
Preconditions | Metering point must not exist in Elhub |
Postconditions | A profiled, comsumption metering point must be created and activated |
Optional/Mandatory | Mandatory |
Test steps | Expected Result |
| Request is successfully sent |
2. Receive positive acknowledgement to DDM (optional)
| Positive Acknowledgement is received to DDM |
3. Send BRS-NO-122 to Elhub
| Request is successfully sent |
4. Receive positive acknowledgement to DDM (optional)
| Positive Acknowledgement is received to DDM |
5. Send BRS-NO-123 to Elhub
| Request is successfully sent |
6. Receive ConfirmStartOfSupply to DDM (optional)
| ConfirmStartOfSupply is received to DDM |
7. Receive NotifyStartOfSupply to DDM
| NotifyStartOfSupply is received by DDM |
8. Verify that DDM's system is updated correctly | Metering pont is created and activated and has an active contract with Supplier of last resort |